Electronics

by mikepilat

Learn Electronics Repair With Satellite TV

All of the satellite service providers are going to give you a free complete satellite system when you sign up for an extended programming contract. It is then your system, just as if you bought it at an electronics retailer and you are responsible for its maintenance and repairs if they are needed. If it breaks down, or any one of its functions begin to not work properly, your service provider will not give you another one for free and they aren’t going to fix it for free either.

Your free satellite TV system is a one shot deal and it is as simple as that. Not all of them give the system completely free of charge though and there is a good reason why. DirecTV charges a little money when you get a high definition receiver from them, to help to offset the added expense that comes with the higher quality and durability of Hughes electronics components.

All of the electronics equipment that DirecTV supplies their viewing family members with carry the Hughes name exclusively and it also carries with it the Hughes reputation for quality and reliability. High definition receivers are more expensive than standard programming receivers and if a satellite TV service provider will give you one free of any cost at all, it is because it is a cheap unit and that is how they are able to do it and stay in business.

They know that when it breaks down, it is your problem and you will have to fix it to watch the programming that you are paying for. Everyone has had some experience with cheap electronics components. You get it home and it looks great and works fine for a while, then it starts to give you problems. A function only works sometimes and a light that is supposed to stay on starts to blink on and off.

One day it smells like burning wires when you turn it on and something else stops working. You give it a little shake and you can hear something rattling around inside of it, a loose screw, or something that has come unsoldered. When you take it to get repaired they tell you it will cost just as much money to buy a new one, as it will cost to repair the piece of junk.

Satellite service providers like to give their electronics equipment snazzy names, with lots of letters and numbers in them, as if they were naming a military test aircraft, or a sports car, but underneath the flashy sounding name is cheap electronics gear. When you go with the unpretentious Hughes name, you get the long standing reputation for quality and durability that comes with that name.

A high definition receiver is a complex piece of equipment, especially if it has a DVR installed inside of it and paying the minimal amount of money that DirecTV asks to offset the added expense that comes with the higher quality of Hughes product, is cheap insurance that you are not going to have to buy a new system, or have yours repaired further down the road. Free stuff is great to get, unless it is cheap junk.

by mikepilat

Setting Up as an Electronic Repair Authorized Service Center

If you plan to upgrade your workshop into an Authorized Service Center, this should guarantee plenty of work and a secure future. Setting up from scratch as an Authorized Service Center is not an easy job. Your workshop needs to meet the manufacturers’ requirement first before they can appoint your company as an Authorized Service Center.

• Good track record – Manufacturer expect a company to have a good track record in the trade and have been around for a long time.

• Accessibility – Easy for a manufacturer to deliver products to you for repair besides it save time.

• Space – A company must have enough space to store their product. A light industrial unit will be fine for them.

• Security – An alarm system is essential, door and windows must be protected so they are difficult to force. Any break in will cause you to lose business.

• Reception Area – A proper reception area, neat and tidy workshop will reflect on them as well. First impression count a lot.

• Tools and Test Equipment – The variety of tools and test equipment available will be taken into account. An oscilloscope, frequency counter, SMD rework station is a certain requirement. The work bench should be of decent size and comes with a fluorescent lighting.

• Employee – There must be enough of employee to cope up with the work of repair.

Prolong or continuous delay of repair will make them to reconsider of changing to another service center.

To run an Authorized Service Center needs total dedication, but it will bring you into contact with a lot of people, some of who can be quite influential. It can also widen the product range that comes your way…

by lumachrome

The Importance Of Electronic Repair Courses

Attending electronics repair course provided by your local electronic training institutions is a good move to increase your knowledge in electronics. We cannot limit ourselves in just attending a single subject such as basic electronic troubleshooting and repair. There are many subjects about electronics especially nowadays where many engineering or technical college offers courses on PIC microcontroller. Robotics and household equipments such as air condition, washing machine, TV, monitor and testing equipments are using microcontroller.

You can take up courses like programmable logic controller (PLC), Industrial Automation Electronic, Microcomputer troubleshooting, electronic control systems, networking, computer repair, printer, laptop, monitor, appliance, motherboard, TV, cell phone and etc. You have the choice to attend full time or part time. Nowadays there are many online home study courses too. These specialize courses duration usually are between 3-6 months. Competition is so great and you need more than one skill to face the challenge. I have a friend who is working in oversea told me that if you say you are good in electronic repair, 100,000 peoples are also good in this field so what makes the employers want to hire you as a technician or engineer. The answer is multitasking, that’s mean besides doing component level or circuit board repair work you have to be good in other area such as networking, computer programming and etc. You will be glad if you have attended those courses.

I once attended a seminar where the speaker mentioned about company resizing, company restructuring, and retrenchment, lay down workers, and reorganize company, in other words the speaker said you are fired! We have to fully equip ourselves and be ready to face whatever challenge that is coming on our way. I had some repair friends who never attend any electronic repair courses before and they are venturing into the repair business. Although they can do the repair work, not all equipment can be repaired. This is due to their limitation in understanding electronic. Their jobs are mainly replacing components rather than doing voltage troubleshooting, using scope and etc. I always encourage them to take up at least a basic electronic course to further their knowledge and hope to bring in more income for them. I even encourage them to surf the internet to gain more electronic repair knowledge.As for me, besides repairing monitors and conduct classes on electronic repair, I took up internet marketing as another field for me to venture in. Though my passion is in electronic repair, I begin to like internet marketing because it can generate a passive income for me. I can see the potential in it because you can market to the whole world and make money while you are sleeping. Throughout the few years I had learned about building websites (electronicrepairguide.com was built by me). Building website is not hard, as long as you must have the passion of doing it. I do not know about your passion, but additional knowledge whether in electronics repair or non-electronics is a great advantage for you and learning has no end. Who knows one day I might end up taking robotics designing and repair course.I have read this quote from a bulletin and would like to share it with you.

“Destiny is not a matter of chance, it is a matter of choice. It is not a thing to be waited for; it is a thing to be achieved. A good quote from Benjamin Franklin “If a man empties his purse into his head, no one can take it away from him. An investment of knowledge always pays the best interest”.

Related Electronics Repair Articles

by barnoid

2010 US Consumer Electronics Repair and Maintenance Industry Report

The U.S. Consumer Electronics Repair & Maintenance Industry report, published annually by Barnes Reports, contains timely and accurate industry statistics, forecasts and demographics. The report features 2010 current and 2011 forecast estimates on the size of the industry (sales, establishments, employment) nationally and for all 50 U.S. States and over 900 metro areas. New to the report this year are: financial ratios, number of firms and payroll estimates. The report also includes industry definition, 5-year historical trends on industry sales, establishments and employment, a breakdown of establishments, sales and employment by employee size of establishment (9 categories), and estimates on up to 10 sub-industries, including television, stereo, video players and electronics repair services.

Table Of Contents :

Users’ Guide
Industry Definition and Related Industries
Industry Establishments
Sales and Employment Trends
Financial Ratios
Establishments
Firms and Payroll
Sub-Industries – 2009 Estimated Industry Sales ($Millions)
Sub-Industries – 2009 Estimated Number of Establishments
Sub-Industries – 2009 Estimated Number of Employees
5-Year Trend – Estimated Industry Sales ($Millions)
5-Year Trend – Estimated Number of Establishments
5-Year Trend – Estimated Number of Employees
2010 U.S. Metropolitan Areas – Estimated Number of Establishments
2010 U.S. Metropolitan Areas – Estimated Industry Sales ($Millions)
2010 U.S. Metropolitan Areas – Estimated Number of Employees
2011 U.S. Metropolitan Areas – Estimated Number of Establishments
2011 U.S. Metropolitan Areas – Estimated Industry Sales ($Millions)
2011 U.S. Metropolitan Areas – Estimated Number of Employees
2010 U.S. States – Estimated Number of Establishments
2010 U.S. States – Estimated Industry Sales ($Millions)
2010 U.S. States – Estimated Number of Employees
2011 U.S. States – Estimated Number of Establishments
2011 U.S. States – Estimated Industry Sales ($Millions)
2011 U.S. States – Estimated Number of Employees
Definitions and Terms

To know more about this report & to buy a copy please visit :
http://www.visionshopsters.com/product/2249/2010-U-S-Consumer-Electronics-Repair-Maintenance-Industry-Report.html

Visionshopsters
Ph : 91-22-40583000
Emailid: marketing@visionshopsters.com
Website : www.visionshopsters.com

Techniques for debugging problems for circuit boards used in pinball, arcade and other similar machines.

Find More Electronics Repair Articles

by elfsternberg

Preparing For Electronic Repair Jobs

There are countless opportunities for electronic repair jobs in all major societies.  Industries will depend on intricate production equipment to yield and these machines will constantly need to be maintained and looked after.  Electronic repair is therefore very crucial and people can actually study and enter into this lucrative profession.

The ultimate goal that will be required is full competence for the job and this can only come through proper training.  These are top highlights on how to go about getting to qualify for this field.

Countless colleges and universities will have sound courses to this effect in many places and locations.  Vocational schools will also have electronic repair training which covers a wide range of appliances like stainless steel meat grinders which will offer the foundation needed and mould workers for the industry.  Among other courses to take is the Bachelor of Science in Electronic System, which will be helpful.

The duration of study will be 2 to 4 years all depending on the kind of course that people are taking.  There are various areas of study that students can expect and this is just a list of the top.  They include electronic circuitry, digital circuitry, technical math, electronic control, and electronic devices like under cabinet toaster ovens

All this will be geared to providing the needed understanding into the function of electronics and various aspects involved.  So many people train through experience also.  A basic high school diploma is essential to enter into good colleges for training.   To access excellent electronic repair jobs, it is paramount to conduct some research.  People who can be relied upon by employers to deliver with electronics will certainly be ready for the job market.  Statistics show that these jobs are very lucrative and there is such a high demand for workers.  All industries will certainly need people to repair and install equipment.

This is certainly encouraging for those embarking on finding electronic repair jobs.  Make sure to present all qualifications and experiences for the job as people seek to get the employment they need in this sector.  This will require skills to shine through.  Getting some hands on experience is always a good idea and this will launch many into the exciting world of electronic repairs.

There are endless job opportunities online that people can actually tap into and benefit.  Make sure to apply at different relevant places for consideration and without a doubt, this will all work out.  Make sure to consult the right authorities for proper guidance on this career path and this will help greatly.

More Electronics Repair Articles